Returns are accepted within 30 days after shipment. To be eligible for a return, items must be unused, uninstalled, and in their original packaging, and proof of purchase is required. The following items are not eligible for return: Installed or used products, clearance or final-sale items, trolling motors, programmed AIS units, KVH Starlink products that are registered or opened, special-order products, or products displaying the notice “This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.” in their description. Opened or unsealed DVDs, CDs, or cartography (unless defective) are not eligible for return. Return Merchandise Authorization (RMA) numbers are required for all returns. Learn more.
Shipping Policy
Egret Marine ships marine parts and accessories within the contiguous United States only. Orders are typically processed same day if placed before 3pm CST, excluding weekends and holidays. Learn more.
Heavy-duty, 30 Amp output for Type 3 Drives or Constant Running Pumps
Evolution Ai for superior performance
NO calibration required
SeaTalkng Network Compatible
ACU-400 auxiliary power to SeaTalkng network
Includes p70R Autopilot Controller
Includes:
EV-1 Sensor Core
p70Rs Autopilot Control Head
ACU-400 Actuator Control Unit (Includes the M81105 Rotary Rudder Reference)
Evolution Cabling Kit
EV Unit O-Ring Pack (set of 2)
Wall Mounting Bracket
The EV Sensor Core
At the center of every Evolution system is the intelligent EV sensor core, a 9-axis sensor that monitors vessel motion in all three dimensions. The innovative EV sensor core combines advanced solid-state sensors with the Evolution autopilot processor into a single easy-toinstall housing.
Mount the EV sensor core above or below decks, the rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing and submersion standards.
The EV-1 is designed for Evolution mechanical and hydraulic autopilot systems. SeaTalkng networking enables a single cable connection for power and data to the Evolution ACU (actuator control unit) and extended SeaTalkng and NMEA2000 networks.
Features:
Precision monitoring of heading, pitch, roll, and yaw allowing the autopilot to evolve instantly as sea conditions and vessel dynamics change
Flexible installation options
Mount above or below deck
Simple SeaTalkng connectivity to the control head and ACU
Solid state sensor technology delivers dynamic accuracy to within 2 degrees in all conditions
Fast and reliable heading data for MARPA, radar overlay, and heading modes on Raymarine multifunction displays
p70Rs Autopilot Control Head
The p70R has a convenient rotary control knob and support for multiple autopilot modes including Auto, standby, trolling patterns, and track mode from your GPS or chartplotter.
Features:
LightHouse user interface is simple and quick to use
Wide 160° viewing angles
Start up wizard helps you configure the pilot quickly and easily
Anti-reflective coating for improved visibility in bright sunlight
Low power - typically 132mA/1.6W - 27% less than ST70 at x4 measured brightness
Supported autopilot modes: Auto; Standby; Pattern; Track; Wind Vane; Power Steer and Jog Steer
Simple system and group dimming/illumination
Support for multiple data sources
SeaTalkng/NMEA2000 and SeaTalk1 connectivity (no bridging required)
ACU-400 Autopilot Control Unit (ACU)
The rugged ACU (Actuator Control Unit) delivers reliable autopilot drive power and also provides power to the SeaTalkng bus. Choose the ACU that fits your steering system type.
Support Drive Units
Heavy-duty, 30 Amp output for Type 3 Drives or Constant Running Pumps
Why a Magnetic Compass Still Matters GPS chartplotters are indispensable, but a magnetic compass is your fail-safe when electronics go dark — dead battery, blown fuse, or water intrusion. Every...
Why Every Boat Needs a VHF Radio A marine VHF (Very High Frequency) radio is one of the most important pieces of safety equipment on any boat. It's your primary...
Why CO and Propane Alarms Are Non-Negotiable Carbon monoxide (CO) is the leading cause of boating fatalities that don't involve drowning. It's colorless, odorless, and can incapacitate a person within...
A properly installed transducer is the foundation of accurate sonar on your bass boat. This complete guide covers mounting methods, location selection, depth settings, cable routing, water testing, and the...
Marine electrical systems demand corrosion-resistant, properly rated components. Here's a practical overview of terminal blocks, switches, and cables for boat wiring.