Free shipping on orders over $150. Learn more
Returns are accepted within 30 days after shipment. To be eligible for a return, items must be unused, uninstalled, and in their original packaging, and proof of purchase is required. The following items are not eligible for return: Installed or used products, clearance or final-sale items, trolling motors, programmed AIS units, KVH Starlink products that are registered or opened, special-order products, or products displaying the notice “This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.” in their description. Opened or unsealed DVDs, CDs, or cartography (unless defective) are not eligible for return. Return Merchandise Authorization (RMA) numbers are required for all returns. Learn more.
Egret Marine ships marine parts and accessories within the contiguous United States only. Orders are typically processed same day if placed before 3pm CST, excluding weekends and holidays. Learn more.
Mold & Mildew Stain Remover - 16oz
Say goodbye to stubborn mold and mildew stains with Xanigo Marine’s Mold & Mildew Stain Remover! This powerful formula is easy to use and is the perfect solution for removing mold and mildew stains from boat tops, vinyl cushions, chairs, canopies, and more. Its versatile formula can also be used on rubber fenders, fiberglass, caulk, tile, grout, shower stalls, sinks, counters, and other surfaces that may be prone to mold and mildew.
Simply spray the product onto a cool substrate, let it soak for a few minutes, and watch the mold and mildew disappear. To ensure the best results, avoid using it in direct sunlight.
After removing it, make sure to PREVENT the mold from coming back with Xanigo Marine’s Mold & Mildew Preventer.
Specifications:
STEP 1: Remove Mold & Mildew with Xanigo Marine's Mold & Mildew Stain Remover
Xanigo Marin’s Mold & Mildew Stain Remover is a very effective way to remove mold and mildew. Being a harsh chemical, it should only be used once to remove the mold, and then the preventer should be applied to prevent the mold from coming back. Liberally apply the Mold & Mildew Stain Remover to the seats. Let it sit for 60-90 seconds but do not let it dry. An additional solution may need to be applied— keep it wet. Agitate in a circular motion with a brush to remove the mold from the pores. Rinse thoroughly with clean water.
STEP 2: Neutralize the Remover
After rinsing the remover off with fresh water, it's important to make sure any leftover remover is neutralized so it doesn't dry out vinyl or impact stitching. Spray the Waterless Wash onto the seats and wipe it in with a microfiber cloth to neutralize the chemicals in the remover.
STEP 3: Prevent Mold & Mildew with Xanigo Marine's Mold & Mildew Preventer
With just one application, a boat will be protected against mold and mildew for up to 90 days. The preventer creates a covalent bond with the surface on which it is applied. Users can apply this to almost any marine surface, including vinyl seats, life jackets, canvas, ropes, compartments, live wells, bilges, patio furniture, and other areas of high moisture.
Spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber cloth. Remember to spread, not wipe off.
STEP 4: Maintain Seats with Xanigo Marine's Waterless Wash
Keep the boat clean between mold prevention applications without the use of harsh chemicals or wasting water. Spray the Waterless Wash onto the seats, let it sit for 15-20 seconds, and wipe it off with a microfiber cloth. Remove sunscreen (a major food source for mold) and leave a refreshing smell without impacting the protective layer created by the mold & mildew preventer.
Also, a great way to shine up a gel coat quickly!
Specifications:
Whitecap
Whitecap Straight Short Cam Bar [S-0226SL]
Whitecap
Whitecap Strap Hinge - Polished Brass - 6" x 1-1/8" - Pair [S-0605BC]
Whitecap
Whitecap Push Up Ski Tow Pylon - Vertical Mount [6959]
Southco
Southco Flush Sliding Door Latch - Square - Aluminum [MF-01-110-60]
TACO Marine
TACO Stainless Steel Pin Lanyard w/Plastic Knob [F13-0244BN-1]
Southco
Southco Flush Pull Latch - Push To Close - Medium - White [M1-61-1]
Whitecap
Whitecap 6" Cleat - Teak [60401]
Whitecap
Whitecap Folding Seat Hinge - 304 Stainless Steel - 2" x 3-3/16" [S-3444]
Why CO and Propane Alarms Are Non-Negotiable Carbon monoxide (CO) is the leading cause of boating fatalities that don't involve drowning. It's colorless, odorless, and can incapacitate a person within...
Choosing the right VHF speaker for your boat comes down to weatherproofing, power handling, and mounting flexibility. Here's what to look for.
A properly installed transducer is the foundation of accurate sonar on your bass boat. This complete guide covers mounting methods, location selection, depth settings, cable routing, water testing, and the...
A properly built NMEA 2000 network lets your chartplotter, GPS, AIS, and instruments share data seamlessly. Here's how to plan and build one.
Marine electrical systems demand corrosion-resistant, properly rated components. Here's a practical overview of terminal blocks, switches, and cables for boat wiring.
Carbon monoxide alarms, fire extinguishers, and life jackets are non-negotiable safety gear for any boat. Here's what to know before you buy.
Mold, mildew, and hull fouling are inevitable on the water — but manageable with the right products and a consistent maintenance routine.