Free shipping on orders over $150. Learn more
Returns are accepted within 30 days after shipment. To be eligible for a return, items must be unused, uninstalled, and in their original packaging, and proof of purchase is required. The following items are not eligible for return: Installed or used products, clearance or final-sale items, trolling motors, programmed AIS units, KVH Starlink products that are registered or opened, special-order products, or products displaying the notice “This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.” in their description. Opened or unsealed DVDs, CDs, or cartography (unless defective) are not eligible for return. Return Merchandise Authorization (RMA) numbers are required for all returns. Learn more.
Egret Marine ships marine parts and accessories within the contiguous United States only. Orders are typically processed same day if placed before 3pm CST, excluding weekends and holidays. Learn more.
CLM100 Current Loop Monitor
Maretron's CLM100 converts commercially available 4-20mA current loop transducers into digital data so a wide variety of information can be displayed on Maretron displays. Numerous 4-20mA current loop transducers are supported by the CLM100 including transducers for monitoring DC voltage and current, flow rate, distance, linear velocity and acceleration, angle, angular velocity and acceleration, temperature, humidity, resistance, strain gauges, force (load cell), pressure, decibels, and rotational rate. Some typical applications where the CLM100 is used together with a commercial available 4-20mA transducers include machinery monitoring using accelerometers and vibration sensors. Vibration monitoring of pumps, motors, fans, compressors, and gear boxes provides an early warning of potential problems resulting in fewer breakdowns and reduced maintenance expenses. Another application example using the CLM100 is shaft speed monitoring.
A commercially available 4-20mA rotational rate transducer is coupled to the shaft of interest and the CLM100 converts the transducer data to an RPM that can be read on a compatible NMEA 2000® display. And if you're concerned about the force exerted on a mast stay or perhaps a vessel tow attachment point, commercially available clevis pins with a 4-20mA interface can be connected to the CLM100 and the corresponding load monitored using any of
Maretron's display products.
Features:
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Why a Magnetic Compass Still Matters GPS chartplotters are indispensable, but a magnetic compass is your fail-safe when electronics go dark — dead battery, blown fuse, or water intrusion. Every...
Why Every Boat Needs a VHF Radio A marine VHF (Very High Frequency) radio is one of the most important pieces of safety equipment on any boat. It's your primary...
Why CO and Propane Alarms Are Non-Negotiable Carbon monoxide (CO) is the leading cause of boating fatalities that don't involve drowning. It's colorless, odorless, and can incapacitate a person within...
Choosing the right VHF speaker for your boat comes down to weatherproofing, power handling, and mounting flexibility. Here's what to look for.
A properly installed transducer is the foundation of accurate sonar on your bass boat. This complete guide covers mounting methods, location selection, depth settings, cable routing, water testing, and the...
A properly built NMEA 2000 network lets your chartplotter, GPS, AIS, and instruments share data seamlessly. Here's how to plan and build one.
Marine electrical systems demand corrosion-resistant, properly rated components. Here's a practical overview of terminal blocks, switches, and cables for boat wiring.
Carbon monoxide alarms, fire extinguishers, and life jackets are non-negotiable safety gear for any boat. Here's what to know before you buy.